The SG Dark 7 and SG Light 7 were two 7-string SGs released simultaneously in 2016. They were the first 7-string Gibson SGs ever produced. They use the beveling and body design of the '61 Reissue. Production was limited to 300 units.
Related:
- SG Gothic
- SG CM Black
Light 7[]

Includes all-white hardshell case.
- $2,499 Street
- Avg. weight: 7.5-8 lbs.
Body:
- Beveled, solid Honduran Mahogany body
- '61 Reissue beveling
- Nitrocellulose Lacquer finish
Neck:
- 1-pc quartersawn Honduran Mahogany
- Set-in construction
- 4 degree angle
- Franklin Titebond 50 glue
- Joins body at 22nd fret
- Rounded profile (.800/.875")
- "Fast Access" heel
- Strap button on top horn
- Richlite fretboard
- Mother of Pearl trapezoid inlays & "VII" at 7th
- 12" radius
- Wide Open Book headstock w/ fiber veneer
- 24 frets
- 24 9/16" scale
- TekToid self-lubricating nut
- Cut by Plek machine
- 1 31/32" nut width
Binding:
- Neck, single-ply
- White

Electronics:
- Two Seymour Duncan '59 (SH-1) & JB (SH-4) Humbuckers
- AlNiCo V magnets
- ~8.6k (neck), 19.2k (bridge) Ohms D.C. resistance
- White bobbins and mounting rings
- 3-way switch
- 2 Vol, 2 Tone
- Push/Pull coil split
- 500k non-linear
Hardware:
- Chrome Hardware
- Grover Rotomatic tuning machines
- 14:1 ratio
- Kidney buttons
- Manufactured by Ping
- Bell shaped truss rod cover
- White Speed knobs
- Poly-carbonate control cover
- Prevents electrostatic discharge
- Zamak Nashville Tune-O-Matic bridge
- Zamak stopbar tailpiece
Finishes:
- Alpine White
Dark 7[]

- $2,499 Street
- Avg. weight: 7.5-8 lbs.
Body:
- Beveled, solid Honduran Mahogany body
- '61 Reissue beveling
- Nitrocellulose Lacquer finish
Neck:
- 1-pc quartersawn Honduran Mahogany
- Set-in construction
- 4 degree angle
- Franklin Titebond 50 glue
- Joins body at 22nd fret
- 1961 Slim Taper D profile (.800/.875")
- "Fast Access" heel
- Strap button on top horn
- Richlite fretboard
- Mother of Pearl trapezoid inlays & "VII" at 7th
- 12" radius
- Wide Open Book headstock w/ fiber veneer
- 24 frets
- 24 9/16" scale
- TekToid self-lubricating nut
- Cut by Plek machine
- 1 31/32" nut width
Binding:
- Neck, single-ply
- Black

Electronics:
- Two Seymour Duncan '59 (SH-1) & JB (SH-4) Humbuckers
- AlNiCo V magnets
- ~8.6k (neck), 19.2k (bridge) Ohms D.C. resistance
- 3-way switch
- 2 Vol, 2 Tone
- Push/Pull coil split
- 500k non-linear
Hardware:
- Black Chrome Hardware
- Grover Rotomatic tuning machines
- 14:1 ratio
- Kidney buttons
- Manufactured by Ping
- Bell shaped truss rod cover
- Single-ply black
- Black Speed knobs
- Poly-carbonate control cover
- Prevents electrostatic discharge
- Zamak Nashville Tune-O-Matic bridge and stopbar tailpiece
Finishes:
- Ebony