The SG Standard '60s Coil Tap was a Guitar Center exclusive model produced from late 2009 - 2012. The design was changed in late 2010, with some overlap between the two styles. There was no production limit for this run.
2009 - 2010[]
- $1,299 Street
Body:
- Beveled, solid Honduran Mahogany body
- Nitrocellulose Lacquer finish
Neck:
- 1-pc quartersawn Honduran Mahogany
- 1961 Slim Taper D profile (.800"/.895")
- Set-in construction
- 3 degree angle
- Titebond glue
- Joins body at 19th fret
- Ebony fretboard
- Trapezoid inlays
- 12" radius
- Narrow Open Book headstock
- Resin impregnated fiberboard veneer
- Inlaid Mother of Pearl Gibson logo
- Inlaid Mother of Pearl crown
- "Made in U.S.A." stamp
- 17o pitch
- 22 frets
- 24 9/16" scale
- Corian nut
- Cut by Plek machine
- 1 11/16" nut width
Binding:
- Neck, single-ply
- Thicker style
- Fret-edge binding
Electronics:
- Two Burstbucker 1 & 3 Humbuckers
- AlNiCo II magnets
- 6.5k (neck) & 7.5k (bridge) Ohms D.C. resistance
- 3-way switch
- 2 Vol, 2 Tone
- Push/Pull coil split
- CTS 300k volume, linear
- CTS 500k tone, audio
- "Quick-Connect" circuit board
Hardware:
- Chrome Hardware
- Grover "Gibson Deluxe" tuning machines
- 14:1 ratio
- Green Keystone buttons
- Manufactured by Ping
- TonePros "Kluson Deluxe" tuning machines
- 15:1 ratio
- Green Keystone buttons
- 5-ply "Batwing" pickguard
- Single-ply (Silverburst)
- Bell shaped truss rod cover
- 2-ply b/w with "SG" hot-stamp
- Black Reflector knobs
- Zamak Nashville Tune-O-Matic bridge and stopbar tailpiece
Finishes:
- Classic White
- Silverburst
2010 - 2012[]
Note: Incorrectly listed by Guitar Center as having 490/498 humbuckers and Rounded '50s neck.
- $1,299 Street
Body:
- Beveled, solid Honduran Mahogany body
- Nitrocellulose Lacquer finish
Neck:
- 1-pc quartersawn Honduran Mahogany
- 1961 Slim Taper D profile (.800"/.895")
- Set-in construction
- 3 degree angle
- Titebond glue
- Joins body at 19th fret
- Indian Rosewood fretboard
- Trapezoid inlays
- 12" radius
- Narrow Open Book headstock w/ fiber veneer
- Inlaid Mother of Pearl Gibson logo
- Inlaid Mother of Pearl crown
- "Made in U.S.A." stamp
- 17o pitch
- 22 frets
- 24 9/16" scale
- Corian nut
- Cut by Plek machine
- 1 11/16" nut width
Binding:
- Neck, single-ply
- Thicker style
- Fret-edge binding
Electronics:
- Two Burstbucker 1 & 3 Humbuckers
- AlNiCo II magnets
- 6.5k (neck) & 7.5k (bridge) Ohms D.C.R.
- Uncovered, zebra bobbins
- 3-way switch
- 2 Vol, 2 Tone
- Push/Pull coil split
- CTS 300k volume, linear
- CTS 500k tone, audio
Hardware:
- Chrome Hardware
- TonePros "Kluson Deluxe" tuning machines
- 15:1 ratio
- Green Keystone buttons
- 5-ply "Batwing" pickguard
- Bell shaped truss rod cover
- 2-ply b/w with "SG" hot-stamp
- Black Reflector knobs
- Zamak Nashville Tune-O-Matic bridge and stopbar tailpiece
Finishes:
- Vintage Cherry
- Honey Burst