SG Standard 120

The SG Standard 120 was a limited run model for 2014, essentially offering the specs of the 1991-2012 Standard and celebrating the 120th Anniversary of Gibson. These models seem to have been shipped with both the Grover and TonePros versions of "Deluxe" style tuners. The way to tell the difference is that the Grovers say "Gibson Deluxe" on the back, whereas the TonePros say "Kluson Deluxe".

Features

• $1,899 Street
• $1,699 Street (2015 Clearance)

Body:

• Beveled, solid Honduran Mahogany body
• Nitrocellulose Lacquer finish

Neck:

• 1-pc quartersawn Honduran Mahogany
• Set-in construction
  • 4 degree angle
  • Titebond glue
  • Joins body at 19th fret

• Rounded '50s profile
• Indian Rosewood fretboard
  • Acrylic Trapezoid inlays
  • 120th Anniv. banner inlay at 12th fret
  • 12" radius
• Narrow Open Book headstock
  • Resin impregnated fiberboard veneer
  • Inlaid Mother of Pearl Gibson logo
  • Inlaid Mother of Pearl crown
  • "Made in U.S.A." stamp
  • 17^o pitch
• 22 frets
• 24 ⁹/₁₆" scale
• TekToid self-lubricating nut
  • Cut by Plek machine
• 1 11/16" nut width

Binding:

• Neck, single-ply
• Thicker style

Electronics:

• Two 490R/498T Humbuckers
  • AlNiCo II (neck) & V (bridge) magnets
  • 7.4k (neck) & 9k (bridge) Ohms D.C. resistance
• 3-way switch
• 2 Vol, 2 Tone
  • CTS 500k non-linear
  • "Quick-Connect" circuit board

Hardware:

• Chrome Hardware
• Grover "Gibson Deluxe" tuning machines
  • 14:1 ratio
  • Green Keystone buttons
  • Manufactured by Ping
• TonePros "Kluson Deluxe" tuning machines
  • 15:1 ratio
  • Green Keystone buttons
• 5-ply "Batwing" pickguard
• Bell shaped truss rod cover
  • 2-ply b/w with "SG" hot-stamp
• Black Reflector knobs
• Zamak Nashville Tune-O-Matic bridge and stopbar tailpiece

Finishes:

• Heritage Cherry
• Ebony